Installation Procedure

The Energy Saver is comparatively non-intrusive to install. The indoor and outdoor units need to be connected for electricity and cooling media. Further, the indoor unit needs to have a condensation evacuation hose routed outside.

These connections are made through a 10cm/2" hole in a wall that is drilled during installation.The maximum distance between the two units is 15m/50feet.

Most units are installed within one working day, however it can take longer for more complex installations, e.g. if there is a requirement to place the indoor and outdoor units at some distance between them, with complex pipe installation.

We provide a pre-installation site survey if required to that installation cost estimates are known before installation.